Top 10 usual forklift mishaps ， forklift operation ought to take note of these matters ！.

Don't underestimate the forklift at the workplace. If the operation is bad, there will be severe accidents in minutes, and there are many accidents including forklifts.

Situation 1: The forklift cargo blocked the driver's view, and the person in front could not be discovered, causing a moving accident.
Instance 2: In order to keep the balance of the forklift when raising hefty goods, the employees utilized their body weight as the counterweight, which practically caused casualties.
Situation 3: The size of the forklift cargo surpasses the allowable size of the path and hangs on the roadside shelf, which virtually creates an crash.
Case 4: Forklift is speeding and surrender throughout a turn.
Case 5: The forklift chauffeur did not see the pedestrian, and the pedestrian did not see the forklift.
Instance 6: The forklift raises the employees unlawfully, the forklift motorist does not use the safety belt, the forklift lifter falls and the chauffeur is crushed when the forklift rolls over.
Instance 7: The forklift vehicle driver did not wear a safety belt and fell from the lorry when it surrendered and was crushed.
Forklift operation need to take notice of these issues ：.

Start.
1. Before starting, observe the environments, and after verifying that there are no obstacles that prevent the safety and security of driving, honk the horn first and after that begin.
2. For automobiles with hydraulic (air pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge have to be safe prior to starting.
3. When the forklift begins with a load, the vehicle driver should first validate that the tons is steady and reputable.
4. The start needs to be slow-moving and steady.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground ought to be kept at 300mm-400mm, and the mast should be tilted backwards. .
2. Do not raise the fork too high when driving. When getting in and leaving the work site or while driving, take care that there will be no challenges in the sky. When the load is traveling, the fork should not be increased too expensive, which will impact the security of the forklift. .
3. After dumping, the fork ought to be reduced to the typical driving position prior to driving. .
4. When transforming, if there are pedestrians or cars close by, the driving signal ought to be provided first. High-speed doglegs are banned. High-speed doglegs will certainly trigger the car to shed side security and tip over. .
5. When the forklift is downhill, it is purely prohibited to shut off the fire and slide, and it is prohibited to brake unexpectedly while driving with loads unless there are special situations.
6. When the forklift is running, it has to follow the traffic rules in the manufacturing facility and must keep a certain security distance from the car ahead. .
7. When the forklift is running, the load needs to be in the most affordable setting that does not prevent the driving, and the gantry must be correctly slanted back. The load will not be increased other than when piling or packing. .
8. The elevation of the load need to not block the motorist's sight. In special circumstances, when the product impacts the forward vision, drive at a reduced rate when reversing.
9. It is restricted to switch on the ramp, neither to drive across the ramp. .
10. The safe driving speed of the forklift in the manufacturing facility location is 5 km/h, and it must drive securely at a low rate when getting in the production workshop location. .
11. When the forklift is lifted, raised or driven, it is prohibited for personnel to stand on the fork to hold things and play a stabilizing duty. .
12. If problems are found, they will be repaired and reported in a timely fashion, and they will never run with ailments or conceal them.

filling and discharging.
1. When fork-loading things, the range in between both forks must be changed as required to make the lots of the two forks well balanced and not manipulated, and one side of the item ought to protest the shelf. .
2. It is restricted to collaborate with a solitary fork or utilize a fork top or pull. In special circumstances, safety and security indication must be set up to remind bordering pedestrians. .
3. In the process of filling and dumping products, the forklift needs to be braked with the brake. .
4. Electric Forklift Truck for Warehouse The speed of the lorry need to be slow-moving and constant. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled things and hurt people. .
5. When utilizing a fork to fork the goods, the fork must be as deep as possible under the lots, and it ought to be noted that the fork tip need to not touch other goods or things. The tons needs to be stabilized with marginal back tilt of the gantry so that the lots does not slide in reverse. The mast can be tilted ahead a little when the load is decreased to allow for simple positioning of the load and extraction of the forks. .
6. It is restricted to fork goods at high speed and collide with difficult items with the fork head. .
7. When the forklift is functioning, it is restricted for individuals to loaf the fork, so regarding avoid the collapse of the goods and harm people. .
8. Overwhelming is banned, and it is prohibited to use forks to raise personnel to take part in high-altitude operations to avoid high-altitude falling mishaps. .
9. It is not enabled to utilize the brake inertia to slide, put, round or roll items. .
10. It is not permitted to make use of forks to choose, transform pallet dump.

Leaving .
1. It is restricted to leave the forklift when the products on the fork impend. Before leaving the forklift, you have to dump the goods or lower the fork frame.
2. Pull the emergency brake manage to dead or depress the emergency brake button.
3. The engine is turned off and the power is removed. (Except for special situations, such as the driver does not leave the vehicle's line of sight and does not surpass 1 minute).
4. Eliminate the secret. .

Forklift Operation Precautions.
1. Prior to and after the forklift operation, the appearance ought to be inspected, and fuel, lubricating oil and cooling water should be included.
2. Examine the safety and security efficiency of starting, running and braking.
3. Check whether the lights and horn signals are complete and reliable.
4. Throughout the operation of the forklift, check whether the stress and temperature level are typical.
5. After the forklift is running, the outside leakage should additionally be inspected and the seals ought to be replaced in time.

Forklift Safety Operation Specifications.
1. You must examine before leaving the automobile;.
2. When you come across someone before you throughout driving, you ought to send out a signal at a distance of 5 m;.
3. The driving rate in the factory does not go beyond 5 km/h;.
4. When driving, the nadir of the cargo need to be 0.3 m ~ 0.4 m in the air;.
5. The turning must not be as well sharp to prevent the propensity of " totally free switching";.
6. Running up and down the incline must be slow and consistent, and no switching on the incline is enabled.
7. Do not drive across the gradient. When the slope is above 10%, the car needs to be driven backwards when worsening;.
8. When the forklift workers carry the goods and progress, if they encounter big or hefty products and most likely to the chauffeur's view, they ought to take the turning around exercise
.
The "Eight Prohibitions" must be followed in the operation.
1. Solitary fork operation is not enabled.
2. It is not permitted to lift the goods for far away driving.
3. It is not allowed to get the goods by passing on the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and various other hazardous chemicals with forks.
5. It is not enabled to make use of inertia pressure to pick up the goods.
6. It is not enabled to make use of braking force to expatriation round or easy-to-roll things.
7. It is not allowed Electric Forklift Truck for Warehouse to bring people to service the pallet or fork, and it is purely forbidden to stand under the fork after the fork is increased.
8. Do not drive side to side on inclines
.
Car parking is not allowed under the list below problems.
1. Contours, narrow roads, railway crossings;.
2. Sections with a longitudinal incline more than 5%.
3. When there is an barrier on one side of the road, the opposite side of the section with the exact same length as the challenge need to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844